How To Change A Samsung Water Filter?

If you’re wondering how to change a Samsung water filter, you’ve come to the right place. In this blog post, we’ll walk you through the process step-by-step so you can get it done quickly and easily.

Checkout this video:

Why Change The Water Filter?

Most refrigerator models manufactured in the last five years have a water filter located in the back, near the bottom. The water filter should be replaced every six months to ensure that the water dispensed from your fridge is clean and free of contaminants.

If you have a Samsung refrigerator model that uses a water filter, you will need to know how to change it when the time comes. This process is relatively simple and only takes a few minutes to complete.

How Often To Change The Filter?

It is important to change your Samsung water filter on a regular basis to ensure the continued production of clean, safe drinking water. Depending on your model, you may need to change your filter every 6 months or every 12 months. Check your manufacturer’s guidelines for more specific information.

What Type Of Filter Do I Need?

There are a few things you need to take into account when you’re thinking about what type of filter you need. The first is the type of refrigerator that you have. Samsung offers a range of filters for different types of fridges, so it’s important to make sure that you get the right one. The second thing to think about is the water in your area. If you have hard water, then you’ll need a filter that can remove more minerals from the water. Lastly, think about how much water you want to be able to filter. If you only want to filter a small amount at a time, then you won’t need as large of a capacity filter.

How To Locate The Filter?

On most Samsung Refrigerators, the water filter is located in the top left-hand corner of the fridge, behind a small panel. The panel will usually be clear or white, and it will have a round or rectangular cut-out for the water filter. If you cannot find this panel, consult your refrigerator’s manual.

How To Remove The Old Filter?

Before you begin, make sure that you have the correct replacement filter. Samsung water filters are specific to the model of refrigerator that you have. You can find the model number on the inside wall of the fridge, in the main compartment, or on the front door panel.

To remove the old filter:
1. Twist the old filter to the left to unlock it.
2. Pull down on the filter to remove it from its housing.
3. Dispose of the old filter according to your municipality’s regulations.
4. Rinse off any loose particles from the housing with clean water.

How To Install The New Filter?

It is recommended that you replace your Samsung water filter every 6 months to ensure optimal performance and continued protection against contaminants. Follow the steps below to install your new water filter.

1. Locate your water filter cartridge inside the refrigerator compartment. Depending on your model, it may be located in the front grille, in the top right corner, or on the ceiling.
2. Remove the old filter by turning it to the left and pulling it out.
3. Insert the new filter into the housing and turn it to the right until it is locked in place.
4. Flush the system by running water through the dispenser for 5 minutes or until water runs clear.

How To Reset The Filter Indicator?

Over time, your Samsung refrigerator’s water filter will become clogged with impurities and will need to be replaced. Whether you have the DA29-00020B, the DA29-00003G, or another model, resetting the “filter indicator” light is a simple process that you can do in just a few steps.

What To Do With The Old Filter?

After you have replaced your old Samsung water filter with a new one, you may be wondering what to do with the old one. While you could throw it away, there are actually some recycling programs that accept used water filters. Check with your local recycling center to see if they are able to recycle your old Samsung water filter.

How To Troubleshoot Filter Issues?

If you’re having problems with your Samsung water filter, there are a few things you can do to troubleshoot the issue. First, check to see if the filter is properly installed. If it’s not, follow the instructions in your owner’s manual to properly install it.

If the filter is properly installed and you’re still having issues, try flushing the filter. To do this, turn off your water supply and remove the filter. Rinse it off with clean water and then re-install it. If you’re still having problems after flushing the filter, you may need to replace it.


If your water doesn’t taste great or if it has a funny smell, it might be time to change your Samsung water filter. Most Samsung refrigerators come with a water filter located in the back, near the bottom. To change it, you’ll need to locate the release button or tab and then insert the new filter. Make sure to push the new filter all the way in until it clicks into place.

Scroll to Top