How To Change the Fridge Water Filter on a Whirlpool Model

It’s easy to forget about changing your fridge water filter, but it’s an important part of keeping your fridge running smoothly. In this post, we’ll show you how to change the water filter on a Whirlpool refrigerator model.

Checkout this video:

Why you should change your fridge water filter

It’s important to change your fridge water filter regularly. A new filter can remove contaminants from your water and ice, improving the taste and quality of your water. A clogged or dirty filter can also cause your fridge to run less efficiently, wasting energy and money.

Most filters need to be replaced every 6 months or so, but it’s a good idea to check your manufacturer’s instructions to be sure. You’ll also need to know what type of filter you need to purchase – make a note of the model number of your fridge before you head to the store.

Changing your fridge water filter is a quick and easy process. Just follow these steps:

1. Locate the filter compartment. This is usually near the bottom of the fridge, in the back.
2. Open the compartment door and remove the old filter. Twist it counterclockwise to release it from its housing.
3. Insert the new filter into the housing and twist it clockwise to secure it in place.
4. Close the compartment door and run some water through the dispenser for about 5 minutes to clear any air from the lines. discarding the first few glasses of water that come out.
5- That’s it! You’ve successfully changed your fridge water filter

How often you should change your fridge water filter

You should change your fridge water filter every six months to ensure that your fridge is working properly and providing you with clean water. Changing the filter is easy and only takes a few minutes.

To change the filter, first locate the filter cover on the back of the fridge. The cover will have a knob or lever that you can turn to release the cover. Once the cover is off, remove the old filter and discard it. Insert the new filter into the housing and replace the cover. Turn the knob or lever to lock the cover in place.

Run water through the dispenser for two minutes to prime the new filter. You may notice a slight decrease in water pressure at first, but this is normal and will improve after a few seconds.

  How Long Does A Brita Water Filter Last?

What happens if you don’t change your fridge water filter

If you have a Whirlpool refrigerator with a water and ice dispenser, it’s important to change its water filter every six months. A clogged or dirty filter can slow down the flow of water and ice, and it can also cause water quality problems.

You’ll know it’s time to change the filter when the water flow from the dispenser slows down or when the ice cubes start to taste funny. Replacing the filter is easy, and you can do it yourself in just a few minutes.

Here’s what you’ll need:
-A new water filter (You can find the right one for your model on the Whirlpool website.)
-A Phillips screwdriver
-A quarter-inch hex wrench (This is only necessary if your refrigerator has a locking nut on the filter housing.)

To replace the filter, first locate the housing for the old one. It’s usually inside the fridge, either in the back or on the ceiling. Once you’ve found it, twist off the cap or housing cover to access the old filter.

With an adult’s help, remove the old filter by twisting it counterclockwise until it comes loose. Be careful not to touch any of the black gasket material on the end of the oldfilter, as this can contaminate your new filter. If your old filter has a locking nut, use your quarter-inch hex wrench to loosen it before removingthe old filter.

Now it’s time to install your newfilter. Insert it intothe housing, making sure thatthe arrow onthe end ofthe newfilter is pointingtowardsthewaterline . If you’re usinga lockingnut,tightenitis hand-tightbeforeusingsome additional torque fromyourwrench . Finally, replace  the coverorcap onthehousingand twistittightly intheclockwisedirection . Nowrun some wate throughthedispensertoflush outany air thatmaybepresent in thenewfilterandyou’redone!

How to tell when it’s time to change your fridge water filter

If your Whirlpool refrigerator has a water and ice dispenser, it has a water filter to remove impurities from the water. The filter should be replaced every six months to ensure that the water dispensed from your fridge is clean and free of contaminants. You can tell when it’s time to change the filter by paying attention to the flow of water from the dispenser. When the flow becomes slow or sluggish, it’s time for a new filter.

How to change your fridge water filter

It’s important to change the water filter on your fridge every 6 months to ensure that the water dispensed is clean and free of contaminants. This guide will show you how to change the water filter on a Whirlpool model fridge.

  How To Clean Katadyn Water Filter?

To start, locate the water filter cover in the upper right-hand corner of the fridge. Then, remove the cover by turning it counterclockwise. Next, remove the old water filter by pushing down on it and turning it counterclockwise.

Now, take the new water filter out of its packaging and insert it into the housing, making sure that you push it up until it clicks into place. Finally, replace the cover by turning it clockwise until it snaps into place.

And there you have it! You have successfully changed your fridge’s water filter.

What to do with your old fridge water filter

Assuming you have a Whirlpool model fridge, the first thing you need to do is locate the water filter housing. This is usually located in the upper right-hand corner of the fridge, near the door. If you can’t find it, consult your owner’s manual.

Once you’ve located the water filter housing, open it up and remove the old water filter. Be sure to dispose of it properly according to your municipality’s guidelines – some filters can be recycled, while others need to be disposed of as hazardous waste.

Now it’s time to install the new water filter. Make sure it is firmly seated in the housing – if it isn’t, it won’t work properly and your water quality will suffer. Close up the housing and you’re all set!

How to dispose of your old fridge water filter

Most modern fridges come with a water filter to help purify the water that comes from your fridge’s water dispenser and ice maker. These filters need to be changed every 6 months or so, and disposing of the old one properly is important for both environmental and health reasons.

Here’s a quick guide on how to properly dispose of your old fridge water filter:

1. Unscrew the filter from your fridge. Depending on your model, this might be located in the back of your fridge, in the base grille, or in the ceiling of your fridge.

2. Once unscrewed, lift the filter out and discard it in the trash. Make sure to screw the cap back on tightly to prevent any leaks.

3. Flush out your water dispenser for 2 minutes to clear any residual particles from your old filter.

4. Insert your new filter into your fridge and screw it in tightly. Be sure to consult your owner’s manual for exact instructions on how to do this, as each model is slightly different.

  How to Flush Your Refrigerator Water Filter

5. Run water through your dispenser for 2 minutes before using it again to clear any air from the lines and prime the new filter.

Where to buy a new fridge water filter

One of the most important parts of your fridge is the water filter. The water filter is responsible for keeping the water that flows into your fridge clean and free of contaminants. A dirty or clogged water filter can cause your fridge to have bad tasting water, decreased water flow, and eventually, a water leak.

Luckily, changing your fridge’s water filter is easy and only takes a few minutes. However, before you can change the filter, you need to purchase a new one. Whirlpool offers a wide variety of refrigerator water filters, so finding the right one for your fridge should be easy. You can purchase a new Whirlpool refrigerator water filter online or at many major retailers such as Lowe’s, Home Depot, Best Buy, and Sears.

How to install your new fridge water filter

##
Follow these simple steps to change the fridge water filter on a Whirlpool model:
1. Locate your water filter. It should be located in the upper-right corner of your fridge, near the ceiling.
2. Remove the old filter by turning it to the left.
3. Insert the new filter into the housing, turning it to the right until it is firmly in place.
4. Flush the system by running water through the filter for several minutes (about 3-5 minutes) until the water runs clear.
5. Replace any removable parts, such as a drip tray or basin, and close up your fridge.
You should change your fridge water filter every 6 months, or more often if you notice a decrease in water pressure or taste/smell changes in your water.

How to troubleshoot if your fridge water filter is not working

If your fridge water filter is not working, there are a few things you can do to troubleshoot.

First, make sure that the filter is properly installed according to the manufacturer’s instructions.

Next, check to see if the water supply to the fridge is turned on. The water supply valve is usually located behind the fridge.

If the valve is turned on and the filter is still not working, try replacing the filter with a new one.

Scroll to Top