How to Change Water Filter for Whirlpool Refrigerator?

Follow these easy steps to replace your Whirlpool refrigerator’s water filter. It’s important to change your water filter every 6 months to ensure your water tastes great and is free of contaminants.

Checkout this video:

Why should you change your water filter?

Your refrigerator’s water filter should be replaced about every six months to ensure that the water dispensed from your fridge is clean and tastes great. A clogged or dirty filter can cause your refrigerator’s water dispenser to spurt out dirty water or strange-tasting water.

How often should you change your water filter?

It’s generally recommended that you change your refrigerator water filter every 6 months. Over time, water filters can become clogged with impurities, making them less effective. A clogged water filter can also put strain on your refrigerator’s water pump, which can lead to premature failure.

How to tell when it’s time to change your water filter

It’s easy to forget about your refrigerator’s water filter. But it’s important to change it regularly, according to the manufacturer’s instructions. A clogged or dirty filter can affect the quality and taste of your water and ice, and it can also reduce the flow of water.

If you have a Whirlpool refrigerator, you’ll need to know how to change the water filter when it’s time. Here’s what you need to do:

1. Locate the filter housing inside your fridge. It’s usually in the upper-right corner, but it can vary depending on the model.

2. Unscrew the housing cap and remove the old filter.

3. Insert the new filter into the housing and screw on the cap until it’s tight.

4. Reset your fridge according to the manufacturer’s instructions. This will restart the flow of water to the dispenser and ice maker.

If you have any trouble changing your Whirlpool refrigerator’s water filter, consult your owner’s manual or contact customer service for assistance.

How to change your water filter

It’s important to change your water filter every 6 months to ensure that your water tastes fresh and clean. Follow these steps to change the water filter in your Whirlpool refrigerator:

1. Locate the filter. The filter is usually located in the grille at the bottom of the fridge.

2. Remove the old filter. Take out the old filter by twisting it counterclockwise.

3. Install the new filter. Insert the new filter into the housing and twist it clockwise until it’s tight.

4. Flush the system. Run water through the dispenser for 3 minutes to clear any air from the lines and get rid of any lingering carbon taste from the new filter.

What kind of water filter do you need for your Whirlpool refrigerator?

There are many types of water filters on the market, but not all of them are compatible with Whirlpool refrigerators. It’s important to choose the right type of filter to ensure that your refrigerator is able to properly filter the water.

Whirlpool offers two types of water filters for their refrigerators: sediment filters and activated carbon filters.

Sediment filters are designed to remove impurities from the water, such as dirt, sand, and rust. These filters should be replaced every six months or sooner if the water flow from the refrigerator slows down.

Activated carbon filters are designed to remove chlorine from the water. These filters should be replaced every twelve months or sooner if the taste or smell of chlorine becomes noticeable in the filtered water.

To change the water filter in your Whirlpool refrigerator, first locate the filter located inside the refrigerator compartment. The location will vary depending on the model of your refrigerator, but it is usually located either in the top corner or behind a panel in the bottom corner.

Once you have located the filter, twist it counterclockwise to remove it. Then, take out the new filter and insert it into the housing. Twist it clockwise to secure it in place.

Flush out any air bubbles in the line by running water through the dispenser for 3-5 minutes before using it again.

How to properly dispose of your old water filter

When you change your water filter, it’s important to properly dispose of the old one. Depending on the type of water filter, you may be able to recycle it. Check with your local solid waste district for options in your area.

If recycling is not an option, the best way to dispose of a water filter is by placing it in a sealed bag and throwing it away with your regular trash.

How to troubleshoot if your refrigerator isn’t dispensing water

There are several things that could be happening if your refrigerator isn’t dispensing water. Fortunately, most of them are easy to troubleshoot and fix on your own.

1. Check the water line. The first thing you should do is check the water line to make sure it’s not frozen. If it is, thaw it out and see if that solves the problem.

2. Check the filters. If the water line is thawed and you’re still not getting any water, it’s time to check the filters. Make sure they’re clean and properly installed.

3. Check for a clog. If neither of those things solves the problem, there may be a clog somewhere in the system. Try flushing the lines with a vinegar and water solution to see if that clears things up.

4. Call a professional. If you’ve tried all of those things and you’re still not getting any water, it’s time to call a professional for help.

How to troubleshoot if your refrigerator is leaking water

If your refrigerator is leaking water, it could be due to a clogged or frozen water line, a faulty water valve, or a problem with the float switch.

First, check the float switch to see if it is stuck in the “on” position. If it is, replace it with a new one. Next, check the water valve to see if it is defective. If so, replace it with a new one. Finally, check the water line to see if it is frozen. If it is, thaw it out and then clean the line with a brush.

How to clean your refrigerator water dispenser

If your home has a water filtration system, it’s important to change your refrigerator water filter regularly. A clogged or dirty filter can lead to decreased water pressure and poor tasting water. Fortunately, changing your Whirlpool refrigerator water filter is easy and only takes a few minutes!

To replace your Whirlpool refrigerator water filter:
-Locate the filter housing in the upper right-hand corner of your fridge.
-Remove the old filter by turning it to the left (counterclockwise).
-Insert the new filter by turning it to the right (clockwise). Make sure the arrow on the new filter is pointing towards the water line.
-Flush the newfilter by running water through it for 5 minutes. You can do this by holding a cup under the dispenser until the water runs clear.
-Enjoy clean, fresh tasting water!

FAQs about changing your refrigerator water filter

Q. How often should I change the water filter in my refrigerator?
A. It’s best to change your refrigerator water filter every 6 months to ensure clean, fresh-tasting water and ice.

Q. How do I know when it’s time to change my refrigerator water filter?
A. Your refrigerator will typically have a light that comes on when it’s time to change the water filter. If your refrigerator doesn’t have a light, you can always refer to your owner’s manual for guidance.

Q. Where is the water filter located in my refrigerator?
A. The location of the water filter will vary depending on the model of your refrigerator. It is typically located in the grille at the bottom of the fridge or in the back panel near the top of the fridge. Consult your owner’s manual for specific instructions on finding the water filter in your model.

Q: Do I need a special tool to change my refrigerator water filter?
A: No, you should be able to remove and install your new refrigerator water without any special tools. However, if you have difficulty removing or installing the filter, consult your owner’s manual or contact a qualified repair person for assistance.

Scroll to Top