How To Change Water Filter In Maytag Refrigerator?

If you have a Maytag refrigerator with a water filter, it’s important to change the filter regularly to ensure that your water is clean and fresh. Here’s a quick guide on how to change your water filter.

Checkout this video:

Why should you change your water filter?

Water filters help to improve the taste and quality of your water by removing contaminants such as chlorine, lead, and other chemicals. They can also help to prolong the life of your refrigerator by preventing build-up and sediment in the water lines. For these reasons, it is important to change your water filter regularly – most experts recommend every 6 months.

Maytag refrigerators come equipped with a water filter located in the rear of the fridge. To change it, simply follow these steps:

1. Locate the filter cover in the rear of the fridge and remove it.
2. Pull out the old filter and discard it according to your local regulations (do not flush it down the toilet!).
3. Insert the new filter into the housing and push until it clicks into place.
4. Replace the cover on the housing and screw it back into place.
5. Run water through the dispenser for 2 minutes to prime the new filter before use.

How often should you change your water filter?

It’s important to change your fridge’s water filter every 6 months to ensure that the water dispensed from your fridge is clean and taste great. Some filters can last up to 12 months, but it’s best to err on the side of caution and change it every 6 months.

How do you know when to change your water filter?

Most water filters need to be replaced about every 6 months. You may need to replace your water filter sooner if you use a lot of water, or if the water in your area is particularly dirty.

  How To Make A Homemade Water Filter?

If you have a Maytag refrigerator with a water filter, you can sign up for the Maytag Filter Change Notification System. You’ll get an email or text notification when it’s time to replace your filter.

What are the consequences of not changing your water filter?

If you have a Maytag refrigerator with a water and ice dispenser, it’s important to regularly change the water filter to maintain optimal water quality. Depending on your model, the filter may be located in the back of the unit, behind the kick panel, or in the base grille. Check your owner’s manual for specific instructions on how to access and replace the filter.

Not changing your water filter can lead to several consequences, including:
– Poor water quality
– decreased ice production
– clogged or slow water dispensing

Additionally, not changing your filter can void your refrigerator’s warranty. For optimal performance, it is recommended that you change your filter every six months.

How do you change your water filter?

It’s important to keep your water filter fresh, so your fridge continues to dispense clean, filtered water. Read on for instructions on how to change your water filter in a Maytag refrigerator.

First, locate the filter release button, which is usually located in the upper right-hand corner of the fridge. Press and hold this button while you pull out the old water filter. Dispose of the old filter according to manufacturer’s instructions.

Next, take out the new water filter from its packaging and remove any protective covers. Insert the new filter into the housing and push until it clicks into place.

Finally, run water through the dispenser for at least five minutes to flush out any air bubbles and ensure that the new filter is working properly.

  How To Clean Your Pur Water Filter

What tools do you need to change your water filter?

You need a Phillips head screwdriver to remove the filter housing cap, and you may need a quarter inch socket wrench to loosen the filter housing o-ring retainer nut, depending on your model.

Where can you buy replacement water filters?

If your refrigerator uses a water filter, it’s important to change it regularly to ensure that the water you’re drinking is clean and free of contaminants. Depending on the model of your Maytag refrigerator, the water filter may be located in the back of the unit, behind the kick plate, or in the grille at the bottom of the door.

Replacement water filters can be purchased online or at a local appliance store. When purchasing a replacement filter, be sure to get one that is approved by Maytag for use with your specific refrigerator model.

How much do replacement water filters cost?

Replacement water filters can cost anywhere from $10 to $100 depending on the type of refrigerator you have. The most common type of water filter is the inline filter, which costs around $20. The second most common type is the cartridge filter, which costs around $50. The least common type is the reverse osmosis filter, which can cost up to $100.

How do you properly dispose of your old water filter?

Water filters should be replaced every 6 months to maintain optimal water quality and filtration. Thankfully, changing a water filter is a quick and easy process that does not require any special tools or equipment. Just follow the steps below and you’ll have fresh, filtered water in no time!

1. Locate your refrigerator’s water filter. It is typically located in the back, near the top of the fridge.

  Do Water Filters Filter Out Fluoride?

2. twist the old water filter counterclockwise to remove it from the housing.

3. take the new water filter out of its packaging and insert it into the housing, twisting it clockwise to lock it in place.

4. flush the water system by running water through the dispenser for 2-3 minutes before using it again for drinking or cooking.

Are there any other maintenance tasks you should perform on your refrigerator?

In addition to changing your water filter, there are a few other maintenance tasks you should perform on your refrigerator on a regular basis. These include:
-Cleaning the condenser coils: The condenser coils are located at the back of the refrigerator. They help to remove heat from the refrigerant. Over time, they can become dirty, which can reduce their efficiency. To clean them, simply remove them from the fridge and brush them with a coil cleaning brush.
-Checking and cleaning the door gaskets: The door gaskets are located around the edges of the fridge doors. They help to seal in cold air and prevent warm air from entering the fridge. Over time, they can become cracked or damaged, which can cause them to lose their seal. To check them, simply close the door on a piece of paper. If there is any resistance or if the paper tears, then you will need to replace the gasket.
-Cleaning the interior: The interior of your fridge should be cleaned on a regular basis to prevent food borne illnesses. To clean it, simply remove all food items and shelves and wash them with hot soapy water. Then rinse with clean water and dry thoroughly before replacing everything back in the fridge.

Scroll to Top