How To Replace Water Filter In Whirlpool French Door Refrigerator?

Learn how to replace your water filter in a Whirlpool French Door Refrigerator by following these simple steps.

Checkout this video:

Tools and Parts Needed

In order to replace the water filter in your Whirlpool French door refrigerator, you will need the following tools and parts:
-a new water filter
-a Phillips head screwdriver
-a small flathead screwdriver

1. First, locate the water filter housing inside your refrigerator. The housing is usually located on the ceiling near the front of the fridge.
2. Use a Phillips head screwdriver to remove the screws from the housing cover.
3. Carefully remove the cover and set it aside.
4. Take out the old water filter and discard it according to manufacturer’s instructions.
5. To install the new filter, simply insert it into the housing and reverse the steps above to reassemble your fridge.

Preparing the Fridge for Filter Replacement

Assuming that you have already purchased your replacement filter, the first thing you need to do is prepare your fridge for the replacement process. This involves turning off the water supply to your fridge, which is usually done by turning a knob or valve located behind the fridge. Once the water supply is shut off, remove any food or drink from the fridge, as well as any shelves or drawers that might get in the way.

With the fridge now empty and clear, locate the filter housing, which is usually found in the upper right-hand corner of the fridge interior. Once you have found it, twist the housing counter-clockwise to release it from its position. With the housing now removed, you should be able to see and access the old water filter.

  How Does an Alkaline Water Filter Work?

Replacing the Water Filter

If your Whirlpool French door refrigerator is equipped with a water filter, it’s important to replace the filter on a regular basis to ensure the water dispensed from your fridge is clean and free of contaminants. Here’s a step-by-step guide on how to replace the water filter in your Whirlpool French door refrigerator:

1. Locate the water filter housing on the back of your fridge.

2. Unscrew the housing cap and remove the old filter.

3. Insert the new filter into the housing and screw on the cap until it’s hand-tight.

4. Reset the “change filter” light (if applicable) by pressing and holding the button for 3 seconds.

Now you’re all set! By replacing your refrigerator’s water filter on a regular basis, you’ll enjoy clean, fresh-tasting water and ice from your fridge at all times.

Final Steps

After you have re-installed the fresh new water filter, it is time to put your refrigerator back together. First, locate the big black plug near the bottom of your fridge on the back wall. It will have a small white button next to it. Press this button, and then slide the big black plug back into its original position.

Tips and Tricks

It’s important to keep your refrigerator’s water filter fresh, so that you can always enjoy clean and delicious water. Here are some tips and tricks to help you replace the water filter in your Whirlpool French door refrigerator:

1. Locate the water filter housing. The housing is usually located in the top right-hand corner of the refrigerator, behind the grille.

  Why Wont My Samsung Water Filter Go In?

2. Remove the old filter. To do this, simply turn the filter housing counterclockwise until it comes loose. Then, pull the old filter out of the housing.

3. Install the new filter. Insert the new filter into the housing and turn it clockwise until it is firmly in place.

4. Reset the water filter indicator light (if applicable). On some models, there is a light that indicates when it is time to replace the water filter. To reset this light, simply press and hold the reset button for 3 seconds.

FAQ

How do I replace the water filter in my Whirlpool French door refrigerator?

To replace the water filter in your Whirlpool French door refrigerator, follow these steps:

1. Remove the filter cap from the filter housing.

2. Twist and pull the old filter out of the housing.

3. Insert a new filter into the housing and twist to lock it into place.

4. Replace the filter cap on the housing and turn it to the left to lock it into place.

Conclusion

If your refrigerator has a water filter, it is important to know how to replace it so that you can keep the water clean and safe to drink. Replacing the water filter in your Whirlpool French door refrigerator is a simple process that only takes a few minutes. Here is how to do it:

1. Locate the water filter housing inside your refrigerator.
2. Remove the old water filter by turning it counterclockwise.
3. Insert the new water filter into the housing and turn it clockwise until it is tight.
4. Reset your refrigerator’s water filter indicator by pressing and holding the “RESET” button for 3 seconds.

  How To Install Pur Water Filter On Pull Out Faucet?

Now you know how to replace the water filter in your Whirlpool French door refrigerator!

Scroll to Top