How To Reset Samsung Refrigerator Water Filter?

To reset the water filter indication, locate the multi-function button(s) that control the filter indicator on your display. Then, until the light changes, push and hold the button(s).

Similarly, How do I reset my Samsung refrigerator after changing the water filter?

To reset the water filter indication, locate the multi-function button(s) that control the filter indicator on your display. Then, until the light changes, push and hold the button(s).

Also, it is asked, How do I reset my Samsung refrigerator filter light?

Press and hold the “Alarm / Hold for 3 seconds to Reset Filter” button to reset the indicator light. Hold the “Power Cool” and “Fridge” buttons simultaneously for 3 seconds if your model has an internal control panel. This will return the indicator light to its original blue state.

Secondly, How do you reset a refrigerator after changing water filter?

Reset the status after changing the water filter. For 3 seconds, press and hold the “WATER FILTER” button. The water filter symbol will revert to its original BLUE color when the system is reset, and the words “Replace Filter” will be removed from the display.

Also, Where is the reset button on a Samsung refrigerator?

Look for a little panel that can be flipped up on the top of the refrigerator door. There will be a button or a switch labeled “reset” underneath it. Refrigerators with the functionality may be reset by pressing or flicking this switch.

People also ask, How do I reset my Samsung French door refrigerator?

Reset your refrigerator by unplugging it (or turning off the electricity at the circuit breaker) and waiting five minutes for the electrical charge to dissipate. After that, turn it back on.

Related Questions and Answers

How do you reset the filter light on a Samsung refrigerator rf28r7201sr?

To use the ICE Maker, press and hold the button for 3 seconds. The filter indication will be reset as a result of this action. To test whether the controls are locked, push the Door Alarm button for 3 seconds.

What does Reset water filter mean?

A water filter’s chances of becoming malfunctioning are quite minimal. Instead, the most typical cause is a requirement to reset the change light. This light is usually a timer that reminds you to replace your filter every 3 to 6 months.

How long do I unplug my fridge to reset it?

Remove the plug from your refrigerator. Remove the power wire from the wall socket to disconnect your fridge from its power source. It’s typical to hear some whooshing or banging sounds once you’ve done so. If you don’t leave your fridge unplugged for many minutes, the reset won’t function.

What does refrigerator filter reset mean?

Filter change lights, contrary to common opinion, have nothing to do with a malfunctioning water filter. These lights are really scheduled to turn off once a certain amount of time has passed. The usual fridge filter life is 6 months, hence the LED is configured to turn red 6 months after resetting.

How do you reset the water filter light on a Frigidaire refrigerator?

How to Reset the Filter Indicator on Your Refrigerator Press and hold the Auto and Dispenser Lock buttons until the water filter status indicator light flashes on LightAmana refrigerators. Press and hold the Reset Button on Frigidaire Refrigerators until the Indicator Light Flashes.

How do I reset the change filter light on my Frigidaire refrigerator?

After cleaning the filter, re-plug the device and click the ‘Filter Reset’ button to reset the filter, which will turn off the light.

Why is my Samsung refrigerator filter light red?

When the Filter light becomes red, it means it’s time to replace your water filter cartridge. The red light turns on just before the existing filter’s capacity runs out to give you time to acquire a new one.

How does my refrigerator know when to change the water filter?

The Light of Indicator Most modern refrigerators include an indicator that lights up when it’s time to replace your water filter. Many of them are configured to turn on after a particular period of time has passed; however, some newer versions can detect the actual state of the filter and turn on only when it is unclean.

Are fridge filters on a timer?

The water filter cartridge on the dispenser on many refrigerators with a water filter has a “replace filterindication light. The filter’s capacity is determined by a timed function rather than a sensor.

Can you reset a Samsung fridge?

A normal key combination may generally be used to reset Samsung refrigerators that don’t have a specific reset button. For five seconds, press and hold the Power Cool and Power Freeze buttons at the same time. You’ll hear a chime if the reset was successful, and the fridge will restart with the default settings.

Can I unplug my fridge for 5 minutes?

This normally occurs as a result of the pressure that has built up. When you do this, you run the danger of harming your compressor, which is at the heart of the refrigeration cycle and a critical component of the refrigerator. It’s preferable to leave it unplugged for at least 15-20 minutes before plugging it back in.

Will unplugging my fridge reset the ice maker?

Allow 5 minutes for the refrigerator to be disconnected. The ice system will be able to reset as a result of this. Replug the refrigerator and turn the switch back on after 5 minutes. The ice maker should start operating again as a result of this.

How do I reset the water filter light on my LG refrigerator?

Press and hold the RESET or FILTER button for 5 seconds to reset the water filter light on an LG refrigerator. This should keep the indication light off until the filter has to be replaced again in around 6 months.

What happens if you don’t change water filter?

If a water filter is not replaced for an extended period of time, it will get blocked with impurities. These pollutants may enter the water and cause an unpleasant change in taste and odor.

Do you have to shut off water to change fridge filter Samsung?

Turn off the water when the water filter is at the bottom or on its side, not at the top pointing down. You won’t be able to take it off without force because to the pressure and the fact that the filter is on its side in a Samsung. It will simply release after the water pressure has been relieved.

Can I run my Samsung refrigerator without the water filter?

The AquaPure water filter is not required for most Samsung water and ice dispensers. When there is no filter or the filter is not in the locked position, the water filter housings are built as rotating valves that enable water to bypass the filter.

How do you know when to change Samsung water filter?

To acquire fresh, filtered water, you’ll need a clean water filter. The water filter should be replaced every six months, according to our recommendations. When the six months are up, the refrigerator’s water filter light will illuminate, and it should be reset after changing the filter.

How long does a refrigerator water filter really last?

six times a year

Can I use my refrigerator without the water filter?

The water dispenser and ice maker in most refrigerators can function without a water filter, but others need a filter bypass to function properly.

How long leave Samsung fridge after moving?

2 hrs.

Does a fridge have a reset button?

You may use the reset button on certain refrigerators to return the refrigerator to its factory settings. If your refrigerator doesn’t have a reset button, you might try unplugging it for a few minutes. When you plug it back in, the issue should be resolved.

How long do you wait to plug in a Samsung fridge after moving it?

a few of hours

How do I manually reset my ice maker?

Wait 10 seconds after unplugging the machine. Reconnect the machine and turn it back on. A blue light should illuminate, indicating that the unit has been reset.

How do I force my ice maker to cycle?

A flat-head screwdriver may be required if your gear has a tiny notch. Use it to counterclockwise spin your gear until you hear the aforementioned click. The ice maker will cycle in both cases as a result of the click.

How do you reset the code on a Frigidaire refrigerator?

HINT: Try disconnecting your Frigidaire Refrigerator for 15 minutes to remove the SY CE error code the simplest manner. Reconnect the refrigerator after 15 minutes. This might have cleared the error code and reset the control board.


The “where is the filter reset button on a samsung refrigerator” is a question that we get asked quite often. The answer to this question is, there isn’t one. The only way to reset it would be to remove the water filter and let it dry out for a few hours before reinstalling it.

This Video Should Help:

The “how to replace water filter in samsung side by side refrigerator” is a question that has been asked many times. The answer to the question is fairly simple, and can be found at the end of this blog post.

  • how to reset red filter light on samsung refrigerator
  • samsung refrigerator filter light won’t reset
  • samsung rs27t5200sr filter reset
  • samsung rf23j9011sr water filter reset
  • samsung refrigerator water filter replacement issues
Scroll to Top