How to Reset Your Water Filter on a Whirlpool Fridge

If you have a Whirlpool fridge with a water filter, it’s important to reset the filter indicator light after changing the filter. Here’s a quick guide on how to do it.

Checkout this video:

Locate your water filter

To find your water filter, look in the top right corner of your fridge.
The water filter is usually located in the top right corner of the fridge, behind a small cover. If you cannot find the cover, consult your owner’s manual. Once you have found the water filter, you can proceed with resetting it.

Remove the old water filter

1. Open your refrigerator door and locate the water filter housing in the top, right-hand corner.
2. Remove the old water filter by turning it to the left. As you turn it, you will feel it click into place.
3. Discard the old water filter according to your municipality’s recycling guidelines.
4. Rinse the inside of the water filter housing with clean water to remove any residual charcoal dust before installing the new filter.

Insert the new water filter

Water filters should be replaced every six months to ensure your water tastes clean and fresh. If you have a Whirlpool fridge, resetting the “change filter” indicator light is easy to do. Follow these steps:

1. Insert the new water filter into the filter housing and turn it clockwise until it locks into place.
2. Press and hold the “reset” or “power” button for 3 seconds.
3. The indicator light will now be off, indicating that the water filter has been reset.

Run water through the new filter

While you are waiting for your new water filter to arrive, you can continue to use your fridge. However, you should run water through the new filter before you install it. This will help remove any contaminants that may be present on the filter.

1. Remove the old filter from your fridge.
2. Place the new filter in a pitcher of water.
3. Run water through the new filter for 5 minutes.
4. Remove the new filter from the pitcher of water and discard the water.
5. Install the new filter in your fridge according to the manufacturer’s instructions.

Check for leaks

If you think your water filter needs to be replaced, check for leaks first. A small leak can cause the water pressure in your fridge to drop, which can lead to your water filter getting clogged more quickly. To check for leaks, open the fridge door and look for any water on the floor or on the shelves. If you see any water, that’s a good indication that your water filter needs to be replaced.

Replace the filter cover

To replace the filter cover, first locate the release button. The release button is usually located on the top or side of the filter cover. Once you have located the release button, press it to remove the cover. Take care not to lose the O-ring that seals the cover to the fridge.

  How Long Should You Run Water After Changing Filter?

With the cover removed, locate the filter cartridge. The filter cartridge is located inside a housing in the top right corner of the fridge, behind the cover. To remove the old filter cartridge, turn it counterclockwise until it stops. Once it is loose, pull it straight out of the housing and discard it.

To install the new filter cartridge, insert it into the housing and turn it clockwise until it stops. Once it is in place, replace the cover and press down until you hear it snap into place.

Reset the filter indicator light

If your Whirlpool fridge has a water filter indicator light, it will notify you when it’s time to replace the water filter. Over time, the light may become dim or go out completely, and you’ll need to reset it. Here’s how to do that:

Locate the reset button on your fridge. It should be located near the water filter.

Insert a small object, like a paperclip or pen, into the reset button hole and press firmly for 3 seconds.

You should see the indicator light turn off and then back on again. If it doesn’t, repeat the process.

Enjoy your clean water!

Resetting your water filter on a Whirlpool fridge is easy! Just follow the steps below:

1. Press and hold the “Reset” button for 3 seconds.
2. The display will show “F1” to indicate that the filter needs to be replaced.
3. Replace the filter with a new one, then press and hold the “Reset” button for 3 seconds to reset the indicator light.

It’s that simple! Now you can enjoy clean, filtered water from your Whirlpool fridge.

Locate your water filter. Usually, the water filter is located in the back, top, or bottom of the fridge.

Find your water filter. On American-style fridge-freezers, it’s usually in the back, top, or bottom of the fridge. On side-by-side models, it might be in the grille at the front of the fridge or in the top right or left corner. On some European models, it might be located inside the fridge compartment.

reset your water filter every 6 months to ensure that your water is clean and tastes great. Depending on your model, you might need to replace the entire water filter housing, or just the filter cartridge.

If you have a Whirlpool refrigerator with a water and ice dispenser, you need to reset your water filter after replacing it. Follow these steps to properly reset your refrigerator’s water filter:

1. Twist the old filter a quarter turn counterclockwise and pull it straight out.
2. Insert the new filter into the housing and twist it a quarter turn clockwise until it stops.
3. Flush 2 gallons (7.6 L) of water through the dispense by holding a cup below the dispenser for 2 minutes until water begins to flow freely from the spout.
4. Press and holdFilter Reset button for 3 seconds to complete reset process.”

  What Water Filter Do I Need For My Frigidaire Refrigerator?

Remove the old water filter. To remove the old water filter, you will need to locate the release button or lever. Once you have found the release button or lever, press or pull it to release the old filter.

Remove the old water filter. To remove the old water filter, you will need to locate the release button or lever. Once you have found the release button or lever, press or pull it to release the old filter.

Discard the old filter according to the manufacturer’s instructions.

Locate the new water filter. Depending on your model of refrigerator, the new water filter may be located in the top right corner or in the bottom left corner of the fridge.

Install the new water filter. To install the new water filter, insert it into the housing and rotate it to the right until it clicks into place.

Reset your fridge. Once you have installed the new water filter, you will need to reset your fridge. To do this, locate the reset button or switch and press or flip it to activate your fridge’s self-cleaning cycle.

Insert the new water filter. To insert the new filter, line up the arrows on the filter with the arrows on the housing. Once the filter is lined up, insert it into the housing and push until it clicks into place.

To reset the “change filter” light on your Whirlpool fridge, start by inserting the new water filter. To insert the new filter, line up the arrows on the filter with the arrows on the housing. Once the filter is lined up, insert it into the housing and push until it clicks into place.

Next, locate the reset button for your “change filter” light. This button is usually located next to the light itself. Once you have found the reset button, press and hold it for 3 seconds. After 3 seconds have passed, release the reset button and your “change filter” light should now be reset.

Run water through the new filter. To run water through the new filter, locate the water dispenser on your fridge. Place a cup under the dispenser and press the lever to dispense water. Let the water run for a few minutes to clear the line of any air.

If your Whirlpool fridge has a water filter, it’s important to replace the filter when the “change filter” light comes on. A new filter will improve the taste of your water and make sure your fridge is providing you with clean, safe water.

To replace the water filter on your Whirlpool fridge, follow these steps:

1. Buy a new replacement filter from a store or online retailer. Make sure you get the right model for your fridge.

2. Locate the water filter housing inside your fridge. It’s usually found in the top right-hand corner of the fridge cavity.

  How to Change the Water Filter in Your Whirlpool Refrigerator

3. Unscrew the cap from the housing and remove the old filter. Discard it according to your local regulations.

4. Insert the new filter into the housing and screw on the cap until it’s tight.

5. Run water through the new filter to clear out any air that might be in the line. To do this, locate the water dispenser on your fridge and place a cup under it. Press the lever to dispense water and let it run for a few minutes until it runs clear.

Check for leaks. After running water through the new filter, check the housing and connections for any leaks.

It is important to check for leaks after you have replaced your water filter. To do this, run water through the new filter and then check the housing and connections for any leaks. If you find a leak, tighten the connection or replace the O-ring.

Replace the filter cover. Once you have checked for leaks, replace the filter cover by lining up the arrows and snapping it into place.

If your Whirlpool refrigerator has an external water filter, you will need to replace it every six months to maintain optimal performance. The refrigerator will remind you when it is time to replace the filter by displaying a red light on the control panel. To reset the “change filter” light, press and hold the “Reset” button for three seconds. You can find the reset button either on the control panel or inside the refrigerator compartment.

Reset the filter indicator light. If your fridge has a filter indicator light, you will need to reset it after replacing the filter. To reset the light, consult your owner’s manual.

If your fridge does not have a filter indicator light, you do not need to reset it after replacing the filter.

Enjoy your clean water! Now that you have replaced your water filter, you can enjoy clean, fresh-tasting water from your fridge.

It’s easy to forget to replace your refrigerator’s water filter. But it’s important to do so every 6 months to ensure that you’re getting the most out of your fridge and your water. Here’s how to reset your water filter on a Whirlpool fridge:

1. Locate the filter cover at the top right of your fridge.

2. Remove the cover by pushing it up and turning it counterclockwise.

3. Take out the old filter and discard it according to your municipality’s guidelines.

4. Insert the new filter into the housing, making sure that the arrows on the filter are pointing in the direction of water flow.

5. Push the cover back into place and turn it clockwise until it locks into place.

6. Run water through the dispenser for at least 3 minutes, or until the water runs clear, before using it for drinking or cooking.

Scroll to Top