How to Change the Water Filter in Your Whirlpool Refrigerator

Are you looking for a step-by-step guide on How to Change the Water Filter in Your Whirlpool Refrigerator? This blog post has you covered!

Checkout this video:

Introduction

Your Whirlpool refrigerator will keep your food and beverages cold and crisp, but it can only do this with clean water. That’s why it’s important to change the water filter regularly — at least every six months, or more often if you have hard water.

Changing the filter is a simple process that takes just a few minutes, and we’ll show you how to do it step-by-step.

Why change your water filter?

It’s important to change the water filter in your Whirlpool refrigerator every six months to ensure that your ice and water taste great. A clogged or dirty filter can cause your ice to taste bad or make your water smell funny. Replacing your filter regularly also helps to keep your refrigerator running efficiently.

To change the water filter, first locate the housing for the filter. The housing is usually located in the upper-right corner of the refrigerator near the kitchen sink. Once you’ve located the housing, twist off the old filter and discard it. To install the new filter, simply twist it into place. Make sure that you hear it click when it’s in all the way.

Once you’ve changed the water filter, flush out any remaining water in the line by running water through the dispenser for several minutes. This will help to remove any dirt or debris that may be left behind. After flushing out the line, your ice and water should taste great!

When to change your water filter

It’s important to change the filter in your refrigerator at least every 6 months to make sure the water you’re drinking is clean and free of contaminants. If you have a family or live in an area with hard water, you may need to change your filter more frequently.

  How to Filter Out Fluoride in Water

If you have a Whirlpool refrigerator with a water filter, it’s easy to change the filter yourself. Just follow these simple steps:

1. Locate the filter housing in the upper right-hand corner of your refrigerator.
2. Twist the old filter counterclockwise to remove it.
3. Insert the new filter into the housing and twist it clockwise until it’s tight.
4. Flush the water system by running water from the dispenser for 5 minutes or until it becomes clear.
5. Reset yourfilter indicator light (if applicable) by pressing and holding the button for 3 seconds.

That’s it! You should now have fresh, clean water flowing from your refrigerator dispenser.

How to change your water filter

If your Whirlpool refrigerator has a water filter, it’s important to change it regularly. Depending on the model, you should replace yourfilter every 6 months to 2 years.

To change your water filter:
1. Find the location of your filter inside your refrigerator. On most models, it’s in the grille at the bottom of the fridge.
2. Remove the old filter by turning it to the left. Dispose of it according to your municipality’s regulations.
3. Insert the new filter into the housing and turn it to the right until it locks into place.
4. Run water through the dispenser for 5 minutes or until water runs clear before using again.

Step-by-step guide to changing your water filter

It’s important to change the water filter in your Whirlpool refrigerator every six months to ensure that the water dispensed from your fridge is clean and free of contaminants. Follow the steps below to change your water filter.

  Can You Change The Battery In A Brita Water Filter?

1. Locate the water filter housing inside your refrigerator. The location will vary depending on the model of refrigerator, but it is usually located in the upper right-hand corner, near the front of the unit.

2. Remove the old water filter by turning it to the left.

3. Insert the new water filter into the housing and turn it to the right until it is snug.

4. Flush out the system by running water through the dispenser for three minutes before using it again.

Tips for changing your water filter

It’s important to change the water filter in your Whirlpool refrigerator regularly to keep the water and ice tasting fresh. Here are a few tips to make sure you do it properly:

1. Locate the filter. It’s usually in the grille at the bottom of the fridge.

2. Turn off the water supply before you remove the old filter.

3. Follow the instructions that come with your new filter to install it properly.

4. Turn on the water supply and check for leaks around the new filter.

Things to remember when changing your water filter

Before you change your Whirlpool refrigerator’s water filter, it’s important to remember a few things. First, make sure that you have the correct model of filter. The wrong filter will not fit properly and could cause leaks. Second, always turn off the water to your refrigerator before you remove the old filter and install the new one. This will help prevent any water damage. Finally, be sure to flush the new filter for at least three minutes before you use it. This will remove any contaminants that may be in the filter.

FAQs about changing your water filter

Q: Why do I need to change the water filter in my Whirlpool refrigerator?
A: The water filter in your Whirlpool refrigerator is designed to remove impurities from your household water supply. Over time, the filter will become clogged with impurities, which can lead to reduced water flow and decreased ice production. For optimal performance, it is recommended that you change your water filter every six months.

  How Do You Remove A Stuck LG Water Filter?

Q: How do I know when it’s time to change my water filter?
A: A good rule of thumb is to change your filtering every six months, or when you notice a decrease in water pressure or ice production. You can also refer to your owner’s manual for specific instructions on when to change your Whirlpool refrigerator’s water filter.

Q: How do I change the water filter in my Whirlpool refrigerator?
A:Changing the water filter in your Whirlpool refrigerator is easy! Simply locate the old filter, twist it counterclockwise to remove, and then twist the newfilter clockwise into place. For step-by-step instructions, please refer to your owner’s manual.

Q: Where can I find replacement filters for my Whirlpool refrigerator?
A: Replacement filters for your Whirlpool refrigerator can be found at most major retailers, including Walmart, Target, and Lowe’s. You can also order replacement filters directly from Whirlpool online or by calling our customer service line at 1-800-442-9991.

Further reading on changing your water filter

If your Whirlpool refrigerator uses one of the following water filters, you can follow the instructions below to replace it.
-4387841
-8171413
-8171414
-2178570
-2272220
-8171787
-8194001
-910165

Conclusion

Installing a new water filter in your Whirlpool refrigerator is easy and takes only a few minutes. Be sure to follow the manufacturer’s instructions for your model. If you have any questions, consult a professional appliance repair person.

Scroll to Top